Wednesday, December 24, 2014
This one was a custom order for a friend. It was a hard one for me to figure out. She wanted ornate, frilly wirework, but I needed to be sure the stone was fully supported on the back. Lapis is a soft stone and I worried that, if it wasn't covered properly on the back that it would break on a bracelet. My solution was to use sterling sheet for a backplate and solder the wires for the cuff onto the back of the backplate. I drilled holes into the sheet to use for the netted bezel.
Monday, October 27, 2014
I've just posted 2 new tutorials today. Best of all, one of them is FREE.
First up is the Archer's Weave Earrings.
This lesson will teach you to make a beautiful pair of earrings using simple frame shaping techniques combined with my “Archer’s Weave”. The archer’s weave looks like tiny little arrows pointing towards each other and meeting in the middle. It’s a great way to add a unique texture to a project.
For this project you will be using 24 gauge wire to complete the weave with 18 gauge wire for the frame. You can vary the look of this weave by using different gauges of wire. The thinner the wire used for the weave, the finer the texture will be. For more noticeable “arrows”, 22 gauge wire woven over 16 gauge wire looks amazing!
I won’t be showing how to wrap the briolettes in this lesson. However, if you don’t already know how to wrap them you can find my free tutorial for wrapping Briolettes and Bead Clusters. Just click on the "Other Technique Tutorials" link just below the page banner to find it.
You can buy the Archer's Weave Earrings Tutorial on my web-site, Gailavira Tutorials, in my Craftsy store or in my Etsy tutorial shop.
Ok, now the freebie you've been waiting for. The Beaded Hoop Link Bracelet Tutorial
In this lesson you will learn how to shape beautifully simple links to create a bracelet. Beads are placed on the links to add a hint of sparkle, but you can make this without beads as well for a unique look.
You can find this one right here on my blog. Just go to the Free Wire Jewelry Making Projects page.
Wednesday, October 22, 2014
I've been getting a lot of requests lately for pieces that incorporate both leather and wirework. The wirework I got (um, we've been over that before, right?). The leather...eh... not so much. Leather is just a little out of my comfort zone. I don't use it much because I've never been good at finishing it off. Now that I'm accepting more of those orders I'm realizing that finishing off the ends is only a small fraction of what I need to know.
This bracelet was a practice piece for one of those orders. The issue I had here was that the customer didn't want the cuff to be more than half an inch wide, but the focal stone, as you can see, is a bit bigger. So, how to attach the stone in a way that fully supports it?
In this case I decided that a full metal back was in order. I attached the metal sheet, already cut to size, to the inside of the center of the cuff using a rivet. The rivet probably wasn't necessary, except that I was drilling holes in both the back plate and the leather at the same time. Riveting them together made it all stay in place while I did that.
As you can see in this photo, the leather covers the full back of the stone and is sandwiched between the stone and the metal. The wirework holds it all in place nice and tight.
Now that we have all that sorted out, I guess we should get back to my original concern. Finishing off the ends.
The one on the left was finished off with sheet metal, folded over the ends of the bracelet, and riveted in place. This is also the method I used to finish the bracelet from earlier.
The middle one is kind of hard to see correctly in this photo. It's the simplest I could think of, but I'm not really sure I like it. I cut the ends of the bracelet so they were rounded, then put a tube rivet into the leather. To attach the clasp I made large oval shaped jump rings from 16 gauge wire.
The bracelet on the right was, as you can probably already see, wrapped with wire. I think it gives it a nice character for certain types of designs, but I still like the riveted sheet metal ends better.
Monday, October 20, 2014
Wirework is what I do most, and most likely, best. But I do love to play with other materials and techniques as well. One of my favorites is polymer clay. I don't often get the time to work with clay, but when I do I love to make canes. I have so many canes sitting in a drawer that I will probably never get a chance to use all of them. It's not just the canes that I make with a specific design in mind either. It's all the canes I've made from all the beautiful bits of scrap that I cut off of the cane I was supposed to be making first. Usually when I make one cane, I get about 5 or 6 more smaller canes just out of what I cut off of the first one, or the leftovers of the beautiful colors I mixed up for the cane. Or extra pieces of a skinner blend (gradient). Some part of me just refuses to write all of it off as "scrap" to be mixed into oblivion and hidden underneath some other project.
The focal for this bracelet is from one of those scrap canes. It the simplest of all of them really. Just press a bunch of the cut off bits of the main cane together to make a thick rectangle, put it on top of a thin piece of black (or any other contrasting color, I just like black) and roll it up like any other jelly roll cane. I cut off a thick slice, baked it into a round pillow shaped bead, and quickly forgot about it.
Fortunately, while looking for a bead to use for this bracelet, I remembered this particular bead. One of the most common problems with making a framed bead style bracelet is that the bead likes to spin if you don't find someway to keep it stable. The usual fix for this is putting a wire across the back of the bead to keep it from turning. This usually works, but if you turn the bracelet over and look inside, it just seems to make it a little less pretty. I like the inside/back/etc of a piece to look pretty too. If you choose to let it spin though you risk it putting too much stress on the wire holding it in place, eventually breaking it. To correct that on this one, I used the flex shaft and a bur to create a groove all the way around the edge of the bead. This way, when I put the bead in place, I was able to press the frame into the groove. Now it looks just as pretty on the back of the bead as the front, plus it stays just the way it should.
Monday, October 13, 2014
I keep trying to come up with bracelets that work better for me. I like bangles, but I can't wear the ones without a clasp because it hurts my hand to scrunch it up enough to fit the bracelet over it. If I make them big enough that they don't hurt, they end up way too loose on my wrist. The ones with a clasp I'm always worried I'm going to bend out of shape just putting them on.
I needed to find a solution that. So, for this one, I made a focal with openings on both sides that will work sort of like part of a hinge. Then I made pieces that connect to each side by just curling the wire around it a little bit loosely (closed all the way, but large enough to move freely). Now I have a bracelet that fits perfectly and I won't have to worry about it getting bent out of shape just putting it on.
For the cuff part of the bracelet I used another new weave I've been experimenting with recently. It's a variation of the simple figure 8 weave that creates a zigzag pattern over the top of the weave. I could probably have achieved a similar look by creating the weave first, then adding the zigzag on top of it with another wire, but I just didn't want to go that route. By incorporating the zigzag into the weave I was able to reduce the number of wire ends that needed to be secured at the end of the weave, giving it a much cleaner looking finish.
Thursday, October 9, 2014
I've been wanting to play with corrugated metal for a while now. There are so many interesting ways you can manipulate the metal and so many different effects you can achieve all starting with an idea that is as simple as folding a paper fan. Regrettably, metal doesn't fold as easily as paper. That's what a Microfold Brake is for.
Even more regrettably, a Microfold Brake is way too expensive for my budget right now. Luckily for me (and many others with a similar budget) a Tube Wringer also works.
As the name implies, it's meant for wringing out tubes. You know, like getting out the last bit of toothpaste, or glue, or...you get the idea. But, because of those neat extra long gear like things that you run the tube through, it's great for corrugating thin metal as well. I doubt it would work as well as a Microfold Brake for a lot of tasks, but for occasional light duty pieces it'll do the trick.
You just put the metal in the gears, turn the handle a few times, and you have your corrugated metal. For another interesting effect, anneal the sheet then feed it back through with the first corrugation perpendicular to the gears. You can also pinch the folds together on one side of a longer sheet to make curves. Or make tiny pinches in multiple areas for other cool looks. Of course, I have no idea how many other effects you can achieve, but I am sure the number is limitless. That's a lot of learning I have ahead of me.
And, the best part about it, when you get the metal going through, it makes a really cool noise. ;P
Wednesday, October 8, 2014
This week I've been playing around with something a little bit simpler than my usual work. Bracelets made with very simple beaded hoop shaped links.
For this bracelet I decided to use the focal as the clasp. It's a simple mosaic style filled frame, only I used netting to create a base for the beads to go on instead of just filling the frame in a criss crossed manner. I did this to make it more stable.
For this one I used a rainbow Hematite donut bead as the focal and wrapped it in a way similar to how the links were made.
It's been a while since I've written a free tutorial, so, if enough people are interested, I'm thinking I may just do a freebie for the chain used in this bracelet soon. :)
Wednesday, October 1, 2014
A couple pairs of earrings using the new weave I stumbled on recently. I'm finding I like using the weave on simpler designs instead of the more ornate pieces. It lets the weave stand out more instead of letting it get lost in all the other details.
I'm getting a lot of requests for a tutorial using this weave, but I have no idea what to call it. Once I decide what to name the weave I will probably move this one up a bit on my tutorial to do list. I'm not sure if I'll do it as a full project tutorial, or just a tutorial for several of the weaves I've been playing with for a while.
Monday, September 29, 2014
For the next 24 hours you can get my Mixed Metal Swirl Earrings Tutorial for FREE. Just follow the link below.
Want me to do this kind of giveaway more often? If so, go to This Post on my facebook page and comment, like, or share. The more comments, likes and shares my giveaway announcements get on facebook, the more often I will do these giveaways!
Or, if you're not on Facebook, you can retweet, fave, or reply to the tweet below on Twitter.
The link above will be deactivated at 11:15 am ET on 9/30/14.
Sunday, September 28, 2014
This is a new weave I've been experimenting with. I stumbled on it by accident. Not sure if it's completely new (as in never been used by anyone else before) but it's definitely new to me.
For the pendant I used 18 gauge for the frame and 24 gauge for the weave. For the sample piece next to it I used 16 gauge for the frame and 22 gauge for the weave. I love the look the thicker wires give the weave, but it tends to hurt my hands after working a while.
Right now I'm trying to see what other pieces I can use this weave on. I'm leaning more towards simpler designs so that the weave itself can be the main focus. Hopefully I'll have some more stuff to show using this weave in a few days.
Saturday, September 27, 2014
It's been a while, but I finally made myself get back to tutorial writing. This donut wrap has been one of my most requested since I first posted a photo of the opalite donut on the Gailavira Jewelry Facebook Page last year. Since so many people were asking for it, I figured it should be the first one I do. This is just the first on a list of many new tutorials I am planning to write soon.
You can get it on my web-site, http://tutorial.gailavira.com/
You can get it on Craftsy, http://www.craftsy.com/pattern/jewelry/pendant/coiled-swirls-wire-wrap-donut-pendant/113446
Or you can get it Etsy, http://www.etsy.com/listing/204472546/coiled-swirls-donut-pendant-wire-jewelry
For a sneak peak at some of the other designs I plan to write tutorials for soon, click on the image below.
10%-30% off all items in all my shops!
Get 30% off at Gailavira Jewelry
Get 15% off at Gailavira Tutorials
Get 10% off at Goddess Return
Get 10% off at Shut Up and Cuff Me
Discount applies to clearance items as well.
All prices are already reduced.
Thursday, August 7, 2014
Here are the coupon codes for my Etsy shops for this summer. These codes are for all my handmade jewelry shops plus my wire jewelry tutorial shop.
Get 10% off at http://www.GoddessReturn.com/ , http://www.ShutUpAndCuffMe.com/ and http://gailaviratutorials.etsy.com/ by using the coupon code summer10
Get 25% off of orders over $35 at http://www.GailaviraJewelry.com/ by using the coupon code summer25
You have to put the coupon code in the coupon code box during checkout (click the "Apply shop coupon code" below the payment options when viewing your cart to open the coupon code box). If you put the coupon code in the message to seller box it will not work!
Monday, July 28, 2014
I'm having a giveaway in my ear cuff shop!
Use the widget below to enter.
PS. Want us to hold more giveaways? The more our FB giveaway posts get liked, shared and commented on, the more often we'll be holding giveaways for each shop (this includes finished jewelry and tutorials). So don't forget to SHARE THIS FB POST so we can do another giveaway soon!
ALL ENTRIES WILL BE VERIFIED
If an entry action is found to be falsified, the corresponding entry will be deleted.
a Rafflecopter giveaway
Posted by Gailavira at 12:30 AM
Monday, July 14, 2014
It's been brought to my attention recently that I've been neglecting all my fantasy and fairy style loving customers in my ear cuff shop. So, over the last couple weeks, I've been on an ear cuff making spree. I've already listed several of the newer ear cuffs and I plan on listing a lot more soon. And, it seems, I'm not quite finished making more fairy ear cuffs yet either. If there is a style I've had in the past that you are looking for that I haven't already listed, just let me know and I'll see what I can do about getting them in stock again.
Here's a slideshow of what's already in the shop:
You can find them all in my ear cuff shop, Shut Up and Cuff Me
Wednesday, July 9, 2014
10 winners will each receive one free tutorial!
Giveaway ends on 7/11/14 at 11:59pm Eastern time. Winners will be notified 7/12/14. Each winner will be able to pick one tutorial from http://tutorial.gailavira.com.
a Rafflecopter giveaway
Thursday, June 5, 2014
Well, not really a "new" tutorial. It's been out a couple months already. I just forgot to blog about... oops.
This lesson teaches you to make a simple looking bracelet using a weave which, when done correctly, looks similar to an embroidered brick stitch. Though I am using a bracelet for teaching the weave, it can actually be used for many other projects. Part of the beauty of this weave is that you can achieve very different looks simply by varying the thicknesses of the wires that you use.
These photos demonstrate the diversity of the projects you can use this weave for. You can also see the variances in the finished look with different gauge wires.
You can find this tutorial on my web-site, or you can get it from my tutorial shop on Etsy or in my Craftsy store
And don't forget to check out the new section in my Etsy tutorial shop! You can save 30% off the regular price of tutorials by buying Tutorial Packs! There are only a few there right now. I have some more planned to list over the next couple days. If you'd like to make suggestions for which tutorials to put in packs, be my guest! Just let me know which 4-5 tutorials you would like and I'll list them as a pack for you. You can either tell me in the comments here, or contact me through my etsy shop.